CAN Bus to Fiber optic Converter(No Cascading/High rate & Far distance)
Product Description:
The HFD-FO-CAN CAN bus to Fiber Converter support all the transmission speeds (transmission rates):0-1Mbps.The transmission rate is set automatically as soon as the canbus HFD-FO-CAN receives a frame. The setting or adjustment is dependent on the transmission rate. The HFD-FO-CAN CAN FO converter is developed out based on the growing market demand for CAN Bus long distance transmission without any cascading(attenuation).The HFD-FO-CAN uses the most advanced new technology in the world,which is the foundation of the high rate transmission(1MB) over more than 20km without any cascading or delay.Thanks to the advanced technology and high performance,the HFD-FO-CAN to Fiber Converter can be applied in very important projects and harsh places.
Segment monitoring at the optical line:
Each receiver monitors the optical line port connected to it for receive frames and status. If faulty frames are received by the receiver, or no single for longer than the maximum permitted time, forwarding of the received signals is blocked until the port status is OK,frames can be received again correctly.The converter can be equipped with buffering elimination function after 300ms or when the buffer is full.
Network Topologies:
The following network topologies can be realized with the HFD-FO-CAN:
- Point-to-point topologies
- Multi-drop Bus
Fiber Mode: Single mode or Multi Mode
Product Feature & Benefits:
- Buffer function:The HFD-FO-CAN CAN Bus Fiber Optic Converter can protect the data from being lost.The isolation inside the HFD can ensure the converters work normally under harsh environments.Anti-stream function,Buffering: 1000 frames.
- No cascading: The HFD-FO-CAN has no cascading,no frame loss when data is at high rate or long distance transmission.
- Reliability: Compared with other brands,the HFD-FO-CAN can help build up more stable and secure networks,it can maximumly reach 6500 frames/S.
- Buffer clearance: Clear the buffer in nominated time(For Option)
- High rate: Up to 1Mbps(20km distance simultaneously)
Application:
Fire control panel, radar system, security, battery system, film, automative industry, power SCADA, Elevator, industrial automation, solar plant, Wind farm and other industrial fields.
Other Specs:
Technical Data |
|
Voltage/power supply |
9 to 30V DC |
Operating voltage |
9 V to 30 V DC, typ. 24 V, |
Current consumption |
typ. 80 mA@24V |
Output voltage/current (Pin 6 Sub-D socket) |
5 V +5%,–10%/ 90 mA |
Signaling contact Signal transmission |
Max .switch DC24V@2A or This email address is being protected from spambots. You need JavaScript enabled to view it. |
Transmission rate |
0-1Mbps |
Setting transmission rate |
Rotary button or software |
Bit error rate |
< 10-9 |
Electrical port |
Terminal or DB9 |
Input/output signal |
CAN2.0A, CAN2.0B,ISO-11898 |
PIN assignment |
|
Optical ports |
1 or 2 (2 as standard) |
Wavelength |
SM:1310/1550nm, MM:850/1310nm |
optical power:– in glass fiber 9/125um – in glass fiber G 62.5/125 |
-9dBm – -18 dBm -13 dBm – -20 dBm |
Receiver sensitivity |
-34dBm |
Transmission distance:with glass fiber 9/125um with glass fiber G 62,5/125 |
0 – 20,000 m (0.3 dB/km) 0 – 3,000 m (2.0 dB/km) |
Connector |
ST/FC/SC |
Others |
|
Ambient temperature |
-30 °C to +70 °C |
Storage temperature |
–40 °C to +85 °C |
Relative humidity |
<95 %, non-condensing |
Protection class |
IP 30 |
Dimensions (W x H x D) |
43 x 88.5 x 124.5mm(W*D*H) |
Housing material/Color |
Die-cast zinc/Black |
Weight |
approx. 600 g |
Electromagnetic compatibility (EMC)
Limit class B (EN 55022)
EN 61000-4-2
EN 61000-4-3)
Burst: On power supply lines and shielded RS 485 bus lines: ±2 kV (EN 61000-4-4)
Surge: Power lines: ±1 kV symmetrical,Shielded RS 485 lines: ±2 kV asymmetrical (EN 61000-4-5)
Ordering Information:
Model Number |
Description |
Fiber No. |
Fiber Mode |
Fiber Connector |
HFD-FO-CAN-P1M |
Point to point Link,Single Fiber(BI-DI), 2km |
1 |
Multi Mode |
ST/SC/FC |
HFD-FO-CAN-P2M |
Point to point Link,Dual Fiber, 2km |
2 |
Multi Mode |
ST/SC/FC |
HFD-FO-CAN-P1S |
Point to point Link,Single Fiber(BI-DI), 20km |
1 |
Single Mode |
ST/SC/FC |
HFD-FO-CAN-P2S |
Point to point Link,Dual Fiber, 20km |
2 |
Single Mode |
ST/SC/FC |