GPS NTP Time Servers

GPS NTP Time Server

GPS NTP Time Server(GPS Time Synchronized Clock)

Product descriptions:

The SY series of GPS Standard Time Synchoronous Clock that we manufactured are specifically for power system, automatizatio system, communicate system and traffic system that need high-precise time requirer.Our system is based on GPS, and the precision of time is 1µs.The facility is secondary developed with the GPS receiver that made by the special factory of United States. It can track 12 GPS satellites at the same time, and selects the best satellite automaticly for locating and timing.It outputs 1PPS, 1PPM, 1PPH time pulse and UTC time ,and the synchronous precision is 1µs, and it can measure the industrial frequency, and outputs date, time, cycle clock, cycle, clock difference, safe running days, and so on through RS232 serial with two formats. It is selected to used by automatization facilities that need standard time in electric power system.

Technical parameter:

1. Receiving frequency:1575.42MHZ, it can track 8-12 GPS satellites at the same time.

2. Antenna radio sentivity:-166dbw, with 30 metres wire. If the wire is not long enough, customer can prolong it by himself by selection of coaxial-cable that attenuation of

1.56GHZ is not more than 0.7db per metre, the attenuation of prolonged cable is not more than

5db.

3. Capture time: from 20 seconds to 2 minutes

(Annotate: the outputs of synchronous clock are all isolated by photoelectricity coupling and output 60ns)

4.1PPS output:

Timing varacity: 1µs Voltage: TTL voltage Polarity: positive pulse Pulse width: about 100ms Impedence: 50 Ώ Channel number: 1

Fore edge: <20ns

5.1PPM: output:

Timing varacity:: 1µs Voltage: TTL

Polarity: positive pulse Pulse width: about 100ms

Impedence: 50 Ώ Fore edge: <20ns

6.1PPH output:

Timing varacity:: 1µs Voltage: TTL

Polarity: positive pulse Pulse width: about 100ms

Impedence: 50 Ώ Fore edge: <20ns

7.Cycle precision: ±0.001

8.Industry frequency clock: the clock that is promoted by industry electricity is synchronous with standard clock when power is on.

9.Clock difference: that is standard clock minus industry frequency clock,synchronous time difference is zero,precision is 20 ms.

10.Longitude, latitude: where the electric power synchronous clock locates.

11.Display: 14 bits LCD display that includes cycle,date,time,longitude,latitude,industry frequency clock,clock difference (standard clock minus industry frequency clock).

12.RS232: output time code (year, month, day, hour, minute, second), industry frequency clock time(hour, minute, second), clock difference,cycle.

13.RS232: output “ST” format time code (selected by switching circuitry)

14.Power: AC110V to 240V or DC12V to 48V, 10%, 15W.

15.Size: standard industry 19 inch 2U box.1U and 3U can also be provided.

16.  OEM is accepted.

Product features and advantages:

1.SY GPS NTP time server supports GPS or BD satellite systems.

2.SY GPS NTP time server incudes master clock, 30m long GPS antenna,software and mount brackets.

3.NTP/SNTP,RS485/232 and Irig-B output ports can be extended according to customer's requests.Both GPS time server and power supply can made to be redundant.

4.Antenna,mount kits and software are all free.

5.Silver or black color 1U,2U or 3U chassis

6.Low cost & 5 years warranty

7.Application: Electrical Substation, ITS,etc.

Ordering information:

Model

Technical Parameters

 

Comment

(Optional dual power)

SY-GPS-2-G

2 channel 1 PPS,2 channel 1 PPM , 1 channel 1 PPH (TTL/ active optical isolation and passive)

4 channel RS232, 2 channel RS485 (serial code)

2 "RS485 (IRIG-B (DC) difference), lose electric/out-of-step alarm to the 2

With expand output interface (can direct drive extension device)

 

Ac/dc power supply terminals wide input

Optional NTP and optical output

 

SY-GPS-2-E16

2 channel 1 PPS,2 channel 1 PPM , 1 channel 1 PPH (TTL/ active optical isolation and passive)

4 channel RS232, 2 channel RS485 (serial code)

16channel"RS485 (IRIG-B (DC) difference), lose electric/out-of-step alarm to the 2

With expand output interface (can direct drive extension device)

 

Ac/dc power supply terminals wide input

Optional NTP and optical output

 

SY-2U-TIME

SY-2U-GPS-CPU X1

SY-2EX-IRIG-B(DC) X1

12 "RS485 (IRIG-B (DC) difference), lose electric/out-of-step alarm to the 2

 

2Uchassis

Can be expanded plug-in

SY-GPS-2-E32

2 channel 1 PPS,2 channel 1 PPM , 1 channel 1 PPH (TTL/ active optical isolation and passive)

4 channel RS232, 2 channel RS485 (serial code)

32 "RS485 (IRIG-B (DC) difference), lose electric/out-of-step alarm to the 2

With expand output interface (can direct drive extension device)

 

Ac/dc power supply terminals wide input

Optional NTP and optical output

 

SY-2U-TIME

SY-2U-GPS-CPU X1

SY-2EX-IRIG-B(DC) X3

32channel"RS485 (IRIG-B (DC) difference), lose electric/out-of-step alarm to the 2

2U chassis

Can be expanded plug-in

SY-GPS-2-FS16

(PPS OutPut)

2 channel 1 PPS,2 channel 1 PPM , 1 channel 1 PPH (TTL/ active optical isolation and passive)

4 channel RS232, 2 channel RS485 (serial code)

2 "RS485 (IRIG-B (DC) difference),

16 channel 1 PPS / 1 PPM high-pressure high-speed photoelectric isolated active and passive output

lose electric/out-of-step alarm to the 2

With expand output interface (can direct drive extension device)

Ac/dc power supply terminals wide input

Optional NTP and optical output

 

SY-GPS-2-FM16

(PPM ,Pulse Per Minute Output)

 

 

SY-2U-TIME

SY-2U-GPS-CPU X1

SY-2EX-1PPS/1PPM X1

12 "RS485 (IRIG-B (DC) difference), , lose electric/out-of-step alarm to the 2

 

2U chassis

 

SY-GPS-2-FS32(PPS Output)

2 channel 1 PPS,2 channel 1 PPM , 1 channel 1 PPH (TTL/ active optical isolation and passive)

4 channel RS232, 2 channel RS485 (serial code)

2 "RS485 (IRIG-B (DC) difference),

32 channel 1 PPS / 1 PPM high-pressure high-speed photoelectric isolated active and passive output

lose electric/out-of-step alarm to the 2

With expand output interface (can direct drive extension device)

Ac/dc power supply terminals wide input

Optional NTP and optical output

 

SY-GPS-2-FM32

(PPM ,Pulse Per Minute Output))

 

 

SY-2U-TIME

SY-2U-GPS-CPU X1

SY-2EX-1PPS/1PPM X3

36 "RS485 (IRIG-B (DC) difference), , lose electric/out-of-step alarm to the 2

 

2U chassis

SY-GPS-2-NET

2 channel 1 PPS,2 channel 1 PPM , 1 channel 1 PPH (TTL/ active optical isolation and passive)

4 channel RS232, 2 channel RS485 (serial code)

2 "RS485 (IRIG-B (DC) difference), lose electric/out-of-step alarm to the 2

With expand output interface (can direct drive extension device)

2 "NTP/TCP network time output

 

Ac/dc power supply terminals wide input.

Optional  fiber optical output

 

REQUEST A QUOTE

* You can also contact us for a quote by E-mail: sales@buenoptic.net

Please type your full name.
Invalid Input
Invalid email address.
Invalid Input
Invalid Input