CAN Bus Gateways

CAN to TCP/IP Converter(2 Port CAN)

CAN to TCP/IP Converter(CANET-II 2 Port CANbus Data)

Our 2 port CAN Bus to Ethernet(TCP/IP)  gateway is  an intelligent  CAN bus communication  interface  that  is compatible  with  TCP/IP protocol and supports one or two CAN channel. Using this module will enable PC to connect to CAN-bus network via USB bus, forming the CAN-bus network control nodes for the data processing and data collection for the CAN-bus networks such as bus laboratory, industrial control, intelligent residential zone, auto electronics network, and etc.

CAN Bus to Ethernet gateway comes with an electrical isolation module, which could be used to avoid the damage caused by the ground loop and enhance the system reliability when working under a tough environment.

CAN Bus to Ethernet gateway  can  use  our  Tester  software provided  by us  to  directly finish  CAN  Bus message sending, and receiving.

 

1.2 Parameters

Application as Ethernet based interface to the CAN bus Microcontroller STR912FAW44X6(ARM7 Based) Ethernet 10M/100M

Baud rates up to 1MB & 5000 frames.

CAN 2.0A (11-bit ID standard frames) and 2.0B (29-bit ID extended frames) Config software available through the Ethernet interface.

Comply with ISO-11898.

Examples of Visual C++, C++Builder are available;

Operating temperature: -30 to +70

Physical size: (length) 100mm * (width) 70mm * (height) 25mm. Powered by DC 24V DC

Can Bus port number: 1 or 2

1.3 Typical applications

CAN-bus network diagnosis and test

Auto electronic applications

Electric power communication network

Industrial control devices

High-speed and large data communications

Ordering Information:

Model Number

Description

Port No.

Fiber Mode

Fiber Connector

HFD-FO-CAN-P1M

Fiber Optic Converter,Point to Point Link,

Single Fiber(BI-DI), 2km,DIN Rail Mount

1 CAN +1 FO

Multi Mode

ST/SC/FC

HFD-FO-CAN-P2M

Fiber Optic Converter,Point to Point Link,

Dual Fiber, 2km,DIN Rail Mount

1 CAN+2 FO

Multi Mode

ST/SC/FC

HFD-FO-CAN-P1S

Fiber Optic Converter,Point to Point Link,

Single Fiber(BI-DI), 20km

1 CAN +1 FO

Single Mode

ST/SC/FC

HFD-FO-CAN-P2S

Fiber Optic Converter,Point to Point Link,

Dual Fiber, 20km

1 CAN+2 FO

Single Mode

ST/SC/FC

HFD-FO-CAN-M2M

Fiber Optic Converter,Multi-drop Link,

Dual Fiber(BI-DI), 2km

1 CAN+2 FO

Multi Mode

ST/SC/FC

HFD-FO-CAN-M4M

Fiber Optic Converter,Multi-drop  Link,

4 Fiber, 2km

1 CAN+ 4 FO

Multi Mode

ST/SC/FC

HFD-FO-CAN-M2S

Fiber Optic Converter,Multi-drop Link,

Dual Fiber(BI-DI), 20km

1 CAN+2 FO

Single Mode

ST/SC/FC

HFD-FO-CAN-M4S

Fiber Optic Converter,Multi-drop Link,

4 Fiber, 20km

1 CAN+4 FO

Single Mode

ST/SC/FC

FO-FIB-100PT

Configurable Fiber Optic Converter,

Point to Point Link,Wall Mount

1CAN+2FO

Single Mode

ST/SC/FC

FO-FIB-100BT

Configurable Fiber Optic Converter,

Multi Drop Link,Wall Mount

1CAN+4FO

Single Mode

ST/SC/FC

FO-FIB-MIXED

Configurable CAN Fiber Optic Switch,

Point to point,Multi-drop,Star,Tree,

Wall Mount

2 CAN+4 FO(2TX+2FX)

Single Mode

ST/SC/FC

SW-400T

4 Port Configurable CAN BUS Switch,

Wall Mount

4 CAN

 

 

BRIGE-200T

Configurable CAN TO CAN Bridge

2 CAN

 

 

CANET-I

1 Port CAN to Ethernet Converter

1 CAN+1 TCP

 

 

CANET-II

2 Port CAN to Ethernet Converter

2 CAN+1 TCP

 

 

CAN-USB-I

1 Port CAN to USB Converter

1 CAN+1 USB

 

 

CAN-USB-II

2 Port CAN to USB Converter

2 CAN+1 USB

 

 

CAN-PCI-5001

1 Port CAN PCI Card

1 CAN+1 PCI

 

 

CAN-PCI-5002

2 Port CAN PCI Card

2 CAN+1 PCI

 

 

CAN-232

CAN to RS-232 Converter

1 CAN+1RS232

 

 

CAN-485

CAN to RS-485 Converter

1 CAN+1RS485

 

 

REQUEST A QUOTE

* You can also contact us for a quote by E-mail: sales@buenoptic.net

Please type your full name.
Invalid Input
Invalid email address.
Invalid Input
Invalid Input
Invalid Input