CAN Bus to fiber optic Converter (CAN Bus Point-to-Point Fiber Modem)
CAN-Fiber Converter Descriptions:
The CAN Bus series products provide an optical point-to-point or bus network connection for CAN bus data interfaces on one or two, multimode or singlemode optical fibers. The CAN Bus Point-to-Point Transmission units operate as the end or terminal points and provide an electrical connection and a two fibre optical connection. The units support CAN 1.0 and CAN 2.0 CAN standards, and Device Net. And are transparent to all high level protocols.
This series is available in either wall mount, DIN rail or 3U chassis card configurations.
The HFB-FO-CAN converter can be used in fire alarm system,radar system,security,industrial automation,solar plants and other industrial fields.
Product Features
Up to 1Mbps data rate
Multimode and singlemode
Single fiber solution
Wall mount, rack or chassis configurations
Data | |
Data Formats | ISO-11898, CAN1.0 ,CAN2.0 , Device Net |
CAN Data Rate | 0~1Mbps |
Bit Error Rate | <1 x 10-12 |
Connectors | |
Data | Screw Block Terminal |
Fiber | ST, SC or FC (ST fitted as standard) |
Environmental | |
Operating Temperat ure | - 3 0 C--- +70 C |
Storage Temperature | - 40 C--- +85 C |
Operating Humidity | 0- 95% |
MTBF | >100,000 Hours |
Optical | |
Fiber | Multi mode or single mode |
Wavelength | MM: 850nm, SM: 1310nm |
Number of fibers | 2 or 1 |
POWER | |
Power Input | AC 220V 110v or DC+110V +5V +12V +24V +48V Option |
Mechanical | |
Dimensions | 125(L)×110(W)×36(H )Wall Mount & DIN Rail |
Ordering Information:
Model Number |
Description |
Fiber No. |
Fiber Mode |
Fiber Connector |
HFB-FO-CAN-P1M |
Point to point Link,Single Fiber(BI-DI), 2km |
1 |
Multi Mode |
ST/SC/FC |
HFB-FO-CAN-P2M |
Point to point Link,Dual Fiber, 2km |
2 |
Multi Mode |
ST/SC/FC |
HFB-FO-CAN-P1S |
Point to point Link,Single Fiber(BI-DI), 20km |
1 |
Single Mode |
ST/SC/FC |
HFB-FO-CAN-P2S |
Point to point Link,Dual Fiber, 20km |
2 |
Single Mode |
ST/SC/FC |