Power Serial Device Servers

4-Port Serial to Ethernet Converter(Heavy-duty Indutrial Grade)

4-Port Serial to Ethernet Converter(Heavy Duty Industrial Grade)

Overview

The SED 4-port device servers(EMC-4 Grade) are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The SED device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.The product can be used in harsh environment.

Features and Benefits

·     World’s lowest power consumption

· Speedy 3-step web-based configuration

· Surge protection for serial, Ethernet, and power lines

· COM port grouping and UDP multicast applications

· Screw connectors for secure installation

· DC power inputs with terminal block

· Versatile TCP and UDP operation modes

A Greener Serial-to-Ethernet Solution

The is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the ARM9 inside, the SED series becomes the lowest power consumption device server in the world. The SED series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

3-step Web-based Configuration

The SEDs 3-step web-based configuration tool is straightforward and user-friendly. The SED’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the settings and enable the application, saving a great amount of time and effort.

COM Port Grouping

The SED COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.

The SED series can conveniently connect up to 4 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. With SED series, you can both centralize the management of your serial devices, and distribute management hosts over the network. SED series can be used to connect different devices for remote management, each serial port operates independently to provide maximum versatility, each port can be operate in Driver, TCP Server, and TCP Client mode independently.

Features:

1. Adopt 32 bit ARM processor

2. 4 serial ports, with support for RS-232/RS-485/RS-422

3. Support 10/100M Ethernet

4. Support 300bps-460.8Kbps

5. Support ICMP,IP,TCP,UDP,DHCP,BOOTP,Telnet,DNS,SNMP V1,HTTP,SMTP,SNTP,ARP,PPP,SLIP

6. Support across gateway, router communication

7. Support standard TCP/IP SOCKET

8. Support Virtual serial driver access and auto connect after the network disconnect

9. Choice of configuration methods: Windows, TELNET and WEB

10. Support DIN-Rail or wall mounting installation

Specifications:

Ethernet

Number of ports:1

Standard:10/100Base-T(X)

Speed:10/100M auto-sensing

Working mode: half /full duplex

Working: TCP Server, TCP Client, UDP and Real COM driver

Memory: 8M RAM,4M flash

Electromagnetism isolate: 1.5KV

Connector: RJ45

Serial

Standard:RS-232/RS-485/RS-422

Number of ports: 4

Signals: RS-232:DCD,RXD,TXD,DTR,GND,DSR,RTS,CTS

RS-485:Data+,Data-,GND

RS-422:TXD+,TXD-,RXD+,RXD-,GND

Parity: None, Even, Odd, Space, Mark

Data bits: 5bit, 6bit, 7bit, 8bit

Stop bits: 1, 1.5, 2

Baud rate: 300bps ~ 460.8Kbps

Flow control: RTS/CTS or XON/XOFF

Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction

Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback

Transmission: RS-485/422 side 1200M,

RS-232 port 15M

Interface protection:600W surge protection,

15KV ESD protection

12KV Isolation

 

Software

Network protocols: Support ICMP,IP,TCP,UDP,DHCP,BOOTP,Telnet,DNS,SNMP V1,HTTP,SMTP,SNTP,ARP,PPP,SLIP

Driver support: Windows Real COM driver(Windows NT/2000, Windows XP/2003)

Configuration options: Windows, TELNET and WEB

Power

Power input: 9-40VDC

Consumption: <2.5W

Environment

Working temperature:-20°C~60°C

Storage temperature:-25°C~85°C

Humidity: Relative humidity 5% to 95%

Appearance

Color: Black

163*102.5*27(L*W*H)

Material: Iron (Shell)

Ordering Information:

SED4-A:rs232 mode

SED4-B:rs485 or rs422 mode

SED4-C:rs232,rs422,rs485 3 in 1

The connection way may combine willfully ,serial connector can be termial mark or RJ45 conncetor.

Safety: EN 60950-1

EMC: CE, FCC

GB/T 17626.2-2006 Class 4

GB/T 17626.4-2008 Class 4

GB/T 17626.5-2008 Class 4

GB/T 17626.6-2008 Class 3

EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A

EMS: EN 55024

Power Line Protection:

EN 61000-4-4(EFT) Level 2,

EN 61000-4-5(Surge) Level 3

Warranty: 5 Years

REQUEST A QUOTE

* You can also contact us for a quote by E-mail: sales@buenoptic.net

Please type your full name.
Invalid Input
Invalid email address.
Invalid Input
Invalid Input
Invalid Input