CAN I/O Module

CAN I/O Module(16 bit 8xSingle End Analogue Input(or 4xDifferential Analogue Input)+12bit 4xAnalogue Input+2xDigital Input+2xDigital Output)

CAN Remote I/O Module with 16 bit  8xSingle End AI(or 4xDifferential AI)+12bit 4 AI+2 DI+2 DO

CAN Data Acquisition Module(16 bit 8xSingle End AI(or 4xDifferential AI)+12bit 4xAI+2xDI+2xDO)

Product Introduction (CAN-6000T Series)

CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.

Features and benefits:

  • 32 bits & 120M high speed CPU, the real time embedded OS.
  • DI can read more than 600 times/second.
  • Optocoupler isolation: Digital Input and Output.
  • Power or dual power(Analogue Modules): Independent isolation
  • Surge protection: 15KV
  • The analogue input: Magnetic coupling isolation and protection.
  • The input voltage can be positive and negative, each channel has TVS and ESD protection.
  • The measuring range can be shifted by software.
  • The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
  • The ID and baud rate can be adjusted by rotary button directly.
  • Enclosure: shielded metal 
  • The differential sampling frequency can reach 50Hz/channel
  • The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.

Hardware Specification:

System

CPU

32-bit 120MIPS CPU

Operation System

Real-Time

Watchdog

Yes

Communication

RS-6000M

CAN-6000T

NET-6000M

 

RS485

CAN

Ethernet

10/100 Base-TX

LED Display

Power Indicator

Red

Run Indicator

Green

Error Indicator

Red

Link Indicator

Green

Act Indicator

Yellow

Mechanical

Dimensions

(W x H x D)(mm)

140*110*40

Installation

DIN-Rail mounting

Environment

Operating Temperature

-20℃~+70℃

Storage Temperature

-30℃~+80℃

Power Requirements

Power Input

+9V~30V DC

Power Consumption

<3W

I/O Specification:

Model

CAN-6088

 

Analog Input

Input Channels

8-ch Single End or 4-ch Differential

Input Type

Single End or Differential

Input Range

±10V, ±5V, ±1.25V

0-20mA(External 250ohm Resistor Needed)

4-20 mA(External 250ohm Resistor Needed)

Input Impedance

> 10M(voltage), 250 ohm (current)

Resolution

16-bit

Accuracy

±0.01%

Sampling Rate

All channels: 8 samples/sec

Per channel: 1samples/sec

Isolation

2500V

Protection

Built-in TVS/ESD Protection

±4 kV Contact for each terminal

Analog Output

Output Channels

2

Output Range

±10V, ±5V, 0V~5V, 0V~10V

Resolution

12-bit

Accuracy

±0.1%

Isolation

2500V

Protection

Built-in TVS/ESD Protection

±4 kV Contact for each terminal

Digital Input

Input Channels

2

Input Type

Dry Contact

Wet Contact

On Voltage Level

Close to GND

0V~1V DC

Off Voltage Level

Open

3V~50V DC

Overvoltage Protection

+70V

Isolation

3750Vrms

Digital Output

Output Channels

2

Output Type

Sink, Open Collector(NPN)

Load Voltage

Max 25V DC

Max Load Current

100mA/channel

Isolation

3750Vrms

Input Channels

8

Ordering Information:

Odering Information (CAN-6000T CAN Bus Series)

Model

Description

Digital I/O

CAN-6011T

CAN Remote I/O Module with16-ch DI

CAN-6012T

CAN Remote I/O Module with16-ch DO

CAN-6013T

CAN Remote I/O Module with 8-ch DI and 8-ch DO

Relay Output

CAN-6014T

CAN Remote I/O Module with 5-ch Relay(Form A)

CAN-6015T

CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C)

Analog Input

CAN-6021T

CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI

CAN-6022T

CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI

Analog Output

CAN-6031T

CAN Remote I/O Module with 12bit 4-ch AO

CAN-6032T

CAN Remote I/O Module with 16bit 4-ch AO

RTD

CAN-6041M

CAN Remote I/O Module with 5-ch RTD

Thermocouple

CAN-6042M

CAN Remote I/O Module with 5-ch TC

Mixed

CAN-6088

CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO

REQUEST A QUOTE

* You can also contact us for a quote by E-mail: sales@buenoptic.net

Please type your full name.
Invalid Input
Invalid email address.
Invalid Input
Invalid Input