CAN Bus Gateways

CAN BUS Bridge(Intelligent Repeater)

Intelligent CANbus Repeater(Configurable CAN Bridge)

The BRIDGE-200T Series CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. This product can insulate CAN bus for a distance up to 10Km. This product enables equipment connections to the bus to be doubled. All upper levels protocol is supported.It has software in it,so both CANbus sides' baud rate can be set up by software.

Feature & Advantages:

The CANbridge allows the coupling of two CAN networks, including networks with different baud rates. Unlike a CAN Repeater, which only translates the electric signals, the CAN messages are received completely by the CANbridge and then sent to the other CAN network in line with existing filter and conversion rules (Store-Forward principle). With the aid of conversion rules (gateway tables), CAN messages can be filtered or forwarded under another identifier. With these mechanisms, the bus load can be reduced in the individual networks by only sending messages which are of interest to the other network.

The Series CAN Bus Isolated Repeater can be widely used, such as Industrial Controls, Intelligent Transportation Systems (ITS), Industrial Networking,

Supervisory Control and Data (SCADA) and so on.

Other Specs:

  • Linking two CAN nets with data buffering
  • Different bit rates on the CAN nets possible
  • 11-bit ID and 29-bit ID bridge
  • Internal microcontroller MB90F543
  • High-Speed CAN interface acc. to ISO 11898-2, 1 Mbit/s
  • Electrical isolation by optocouplers and DC/DC-converters
  • Configuration of the CAN-CBM-Bridge/2 module is easily done by means of a PC/terminal
  • Isolation 3000Vsm
  • Lightning/Surge Protection 1~2 lightning strikes
  • ESD Protection 15KV

CAN BUS:

  • Connector Type Terminal
  • Data Rate DC 0-1Mbps
  • Extended Distance 10Km
  • Operating Temperature -40 ~ 70C / -40 ~ +158F
  • Operating Humidity 0 ~ 95% non-condensing
  • Mean Time Between Failure (MTBF) > 70, 000hrs
  • Power Supply Input Voltage 9~40V DC
  • Power Supply Output Voltage 5V DC
  • Dimensions (W × D× W) 156mm× 108mm× 33.6mm
Ordering Information:

Model Number

Description

Port No.

Fiber Mode

Fiber Connector

HFD-FO-CAN-P1M

Fiber Optic Converter,Point to Point Link,

Single Fiber(BI-DI), 2km,DIN Rail Mount

1 CAN +1 FO

Multi Mode

ST/SC/FC

HFD-FO-CAN-P2M

Fiber Optic Converter,Point to Point Link,

Dual Fiber, 2km,DIN Rail Mount

1 CAN+1TX+1RX

Multi Mode

ST/SC/FC

HFD-FO-CAN-P1S

Fiber Optic Converter,Point to Point Link,

Single Fiber(BI-DI), 20km

1 CAN +1 FO

Single Mode

ST/SC/FC

HFD-FO-CAN-P2S

Fiber Optic Converter,Point to Point Link,

Dual Fiber, 20km

1 CAN+1TX+1RX

Single Mode

ST/SC/FC

HFD-FO-CAN-M2M

Fiber Optic Converter,Multi-drop Link,

Dual Fiber(BI-DI), 2km

1 CAN+2 FO

Multi Mode

ST/SC/FC

HFD-FO-CAN-M4M

Fiber Optic Converter,Multi-drop  Link,

4 Fiber, 2km

1 CAN+2TX+2RX

Multi Mode

ST/SC/FC

HFD-FO-CAN-M2S

Fiber Optic Converter,Multi-drop Link,

Dual Fiber(BI-DI), 20km

1 CAN+2 FO

Single Mode

ST/SC/FC

HFD-FO-CAN-M4S

Fiber Optic Converter,Multi-drop Link,

4 Fiber, 20km

1 CAN+2TX+2RX

Single Mode

ST/SC/FC

FO-FIB-100PT

Configurable Fiber Optic Converter,

Point to Point Link,Wall Mount

1CAN+1TX+1RX

Single Mode

ST/SC/FC

FO-FIB-100BT

Configurable Fiber Optic Converter,

Multi Drop Link,Wall Mount

1CAN+2TX+2RX

Single Mode

ST/SC/FC

FO-FIB-MIXED

Configurable CAN Fiber Optic Switch,

Point to point,Multi-drop,Star,Tree,

Wall Mount

2 CAN+ FO(2TX+2RX)

Single Mode

ST/SC/FC

SW-400T

4 Port Configurable CAN BUS Switch,

Wall Mount

4 CAN

 

 

BRIGE-200T

Configurable CAN TO CAN Bridge

2 CAN

 

 

CANET-I

1 Port CAN to Ethernet Converter

1 CAN+1 TCP

 

 

CANET-II

2 Port CAN to Ethernet Converter

2 CAN+1 TCP

 

 

CAN-USB-I

1 Port CAN to USB Converter

1 CAN+1 USB

 

 

CAN-USB-II

2 Port CAN to USB Converter

2 CAN+1 USB

 

 

CAN-PCI-5001

1 Port CAN PCI Card

1 CAN+1 PCI

 

 

CAN-PCI-5002

2 Port CAN PCI Card

2 CAN+1 PCI

 

 

CAN-232

CAN to RS-232 Converter

1 CAN+1RS232

 

 

CAN-485

CAN to RS-485 Converter

1 CAN+1RS485

 

 

REQUEST A QUOTE

* You can also contact us for a quote by E-mail: sales@buenoptic.net

Please type your full name.
Invalid Input
Invalid email address.
Invalid Input
Invalid Input
Invalid Input