CAN PCI Card

One or 2 Channel Isolated CAN Bus PCI Interface Cards

• Introduction:

The PCI-CAN card is a Controller Area Network (CAN) interface card. It supports one or dual-port CAN's interface that can run independently or bridged at the same time. The built-in CAN controller of this card is Philips SJA1000, which provides bus arbitration and error detection with auto correction and re-transmission function.

• Features of Our CAN PCI Card：

 
Passive CAN Interface for PCI slots 
One, two CAN channels with Controller NXP SJA1000 
Baud rates up to 1MBaud, 82C251 Transceiver 
CAN is connected via a 9-pin SUB-D as defined by the CiA DS102-1 standard 
CAN 2.0A (11-bit ID standard frames) and 2.0B (29-bit ID extended frames) 
Development kits for Windows 2000/XP/Vista
Examples of Visual Basic 6.0, Visual C++ 6.0, C++builder 6.0, Delphi7.0, Labview are available
Max data flow 3000 fps (extend frame)
Operating temperature: -25 to +85C

• Application of Our CAN PCI Card:

CAN-bus product development, CAN-bus data analyzer, CAN-bus master/slave network, CAN-bus Teaching applications,CAN-bus gateway/bridge,CAN-bus industrial control & automation,Smart building system, Data transfer between different CAN-bus networks.

Example Topology Figure:

Ordering Information: