CAN Protocol Converters

CAN Protocol Converters

CAN Bus to Ethernet Converter(BUE-CANET-I & BUE-CANET-II) 1.1 Product Overview Our CAN Bus to Ethernet converter is an intelligent CAN bus communication interface that is compatible with TCP/IP protocol and supports one or two CAN channel. Using this module will…

Read more...

CAN to TCP/IP Converter(CANET-II 2 Port CANbus Data) Our 2 port CAN Bus to Ethernet(TCP/IP) gateway is an intelligent CAN bus communication interface that is compatible with TCP/IP protocol and supports one or two CAN channel. Using this module will…

Read more...

CAN FD to Ethernet Converter(CANFD-NET-100T/200T) 1.1 Product Overview CAN-FD-NET-100T/200T high performance CAN FD to Ethernet converter integrates one CAN (FD) interface or two-way CAN FD interfaces and Ethernet interface as well as TCP / IP protocol stack. Users can easily…

Read more...

CAN to CAN FD Converter(Adaptor) The CAN-FD-BRIDGE-200T Series CAN FD bridge adaptor utilizes automatic bidirectional switching requiring no control signal. The product can be used as CAN to CAN FD converter or CAN FD repeater. As CAN (FD) intelligent bridge,…

Read more...

Intelligent CAN FD to CAN Converter(Bridge) The CAN-FD-BRIDGE-200T Series CAN FD bridge utilizes automatic bidirectional switching requiring no control signal. The product can be used as CAN to CAN FD converter or CAN FD repeater. As can (FD) intelligent bridge,…

Read more...

RS-232/485/422 to CAN FD Converter CANFD-COM-100T intelligent protocol converter can quickly connect RS-232/485/422 communication equipment to CAN (FD) fieldbus. The converter supports 1200-921600bps serial port baud rate and 5k~5Mbps CAN (FD) bus communication rate. The converter supports three conversion modes:…

Read more...

One or 2 Channel Isolated CAN Bus PCI Interface Cards Introduction: The PCI-CAN card is a Controller Area Network (CAN) interface card. It supports one or dual-port CAN's interface that can run independently or bridged at the same time. The…

Read more...

2 Channels Isolated CAN Bus PCI Card Introduction: The PCI-CAN card is a Controller Area Network (CAN) interface card. It supports one or dual-port CAN's interface that can run independently or bridged at the same time. The built-in CAN controller…

Read more...

4 Port Manageable CAN BUS Switch(CAN Router) Description of CAN Bus Switch: The SW-400T CAN Bus Switch is a new CAN bus switch that combined the world's most advanced technology into it. There are 4 independent CAN channels who can…

Read more...

Intelligent CANbus Repeater(Configurable CAN Bridge) The BRIDGE-200T Series CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. This product can insulate CAN bus for a distance up to 10Km. This product enables equipment connections to the bus…

Read more...

CAN to Fiber Converter(New Technology) The CAN Bus series products provide an optical point-to-point or bus network connection for CAN bus data interfaces on one or two, multi mode or single mode optical fibers. The CAN Bus Point-to-Point Transmission units…

Read more...

4 Port Intelligent CAN BUS Fiber Optic Switch(Intelligent Router) Description: The FO-FIB-MIXED Can bus to fiber optic switch provide an optical point-to-point or bus network connection for Can bus data interfaces on one or two, multimode or single mode optical…

Read more...

Intelligent CAN to Multi-drop Bus Fiber Optic Converter Description: The FO-FIB-100BT CAN bus fiber optic converter provide an optical Multi-drop bus or star network connection for CAN bus data interfaces on one or two, multi mode or single mode optical…

Read more...

USB to CAN BUS Converter(BUE-CAN-USB) CAN to USB is a very small dongle that plugs into any PC USB Port and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial…

Read more...

Rs-232/485/422 to CAN Bus Converter The Rs-232/485 to CAN Bus Converter utilizes automatic bidirectional switching requiring no control signal. High efficiency, power & signal double isolated product. It can convert RS-232/S-485 system fit with CAN Bus system. Then we can…

Read more...

CAN to RS-232/485 MB Converter(Supports SAE J1939 & Modbus RTU)(B-UT-2505) Description: The Rs-232/485 to CAN Bus Converter utilizes automatic bidirectional switching requiring no control signal. Support Can Bus 2.0A/B,Modbus RTU,SAE J1939 protocol complying with ISO/DIS 11898 specification; High efficiency, power…

Read more...

CAN to RS-232 Adaptor,TTL Transparent Transmission(BUE-CAN-ST) Description: RS-232 in DB9 female, CANBUS DB9 with Binding postBaud rate:300BPS-115.2KBPSSize:63mmX33mmX17mmEnvironment:-40-85℃,Relative humidity:5-95%Distance:>1.2Km for CANBUS; 5m for RS232 Product Feature: No protocol conversion,no software,transparent transmission.Can be used for testing and some other not demanding sites.

Read more...