CAN BUS Bridge(Intelligent Repeater)

Intelligent CANbus Repeater(Configurable CAN Bridge)

The BRIDGE-200T Series CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. This product can insulate CAN bus for a distance up to 10Km. This product enables equipment connections to the bus to be doubled. All upper levels protocol is supported.It has software in it,so both CANbus sides' baud rate can be set up by software.

Feature & Advantages:

The CANbridge allows the coupling of two CAN networks, including networks with different baud rates. Unlike a CAN Repeater, which only translates the electric signals, the CAN messages are received completely by the CANbridge and then sent to the other CAN network in line with existing filter and conversion rules (Store-Forward principle). With the aid of conversion rules (gateway tables), CAN messages can be filtered or forwarded under another identifier. With these mechanisms, the bus load can be reduced in the individual networks by only sending messages which are of interest to the other network.

The Series CAN Bus Isolated Repeater can be widely used, such as Industrial Controls, Intelligent Transportation Systems (ITS), Industrial Networking,

Supervisory Control and Data (SCADA) and so on.

Other Specs:

• Linking two CAN nets with data buffering
• Different bit rates on the CAN nets possible
• 11-bit ID and 29-bit ID bridge
• Internal microcontroller MB90F543
• High-Speed CAN interface acc. to ISO 11898-2, 1 Mbit/s
• Electrical isolation by optocouplers and DC/DC-converters
• Configuration of the CAN-CBM-Bridge/2 module is easily done by means of a PC/terminal
• Isolation 3000Vsm
• Lightning/Surge Protection 1~2 lightning strikes
• ESD Protection 15KV

CAN BUS:

• Connector Type Terminal
• Data Rate DC 0-1Mbps
• Extended Distance 10Km
• Operating Temperature -40 ~ 70C / -40 ~ +158F
• Operating Humidity 0 ~ 95% non-condensing
• Mean Time Between Failure (MTBF) > 70, 000hrs
• Power Supply Input Voltage 9~40V DC
• Power Supply Output Voltage 5V DC
• Dimensions (W × D× W) 156mm× 108mm× 33.6mm