DeviceNet Multi-drop Bus Fiber Optic Converter(New Model)

The HFD-FO-DEV series DeviceNet fiber optic products.which used the most advanced technlogy in the world,can provide an optical point-to-point or bus network connection for DeviceNet data interfaces on one or two, multi mode or single mode optical fibers. The DeviceNet Point-to-Point Transmission units operate as the end or terminal points and provide an electrical connection and a two fibre optical connection. The units support CAN 1.0 and CAN 2.0 CAN standards, and CAN. And are transparent to all high level protocols.

This series DeviceNet Fiber Optic Converter is available in either wall mount, DIN rail or 3U chassis card configurations.

Product Features of the Devicenet Bus fiber optic converter:

• Multimode and singlemode
• Single fiber solution supported
• New technology: Long distance transmission(20km) when baud rate is at 500K high speed, No cascading.
• DIN Rail, Wall mount, rack or chassis configurations, Dual power supply

Other specs of the Devicenet fiber optic converter:

DeviceNet Protocol Repeater

The DeviceNet Repeater is a kind of protocol bridge repeater,which is used to prolong the distance of DeviceNet communication,increase the nodes and improve the isolation ability.The repeater is based on industrial grade and it has low power consumption and easy mount way.When the DeviceNet repeater connects 2 DeviceNet networks,the 2 networks work at the same rate,the system has auto-sensing function.The DeviceNet repeater uses 5 PIN block terminal interface,which is in compliance with DeviceNet standard.

Technical Specification:

Bus Topology: Point to point link

Flow control function: Yes

DeviceNet Bus Interface: 5 PIN block terminal,in compliance with European standard

Transmission Type: Prototocl, DeviceNet frame transmission

Physical standard：DeviceNet,CAN2.0A、CAN2.0B

DeviceNet Baud Rate：125Kbps、250Kbps、500Kbps

500Kbps、800Kbps、1000Kbps；Auto-sensing

Buffering： 128 frames buffer

Power Input：DC9V-DC30V， < 2W ；

LED Status：Data，Power,Work status，Alarm

Dry Contact Alarm Output：Relay Interface，24V@1A,This email address is being protected from spambots. You need JavaScript enabled to view it.

Housing：D35mm DIN Rail，40x 110 x 74（mm）

Enclosure：Metal：IP40

Vibration：In compliance with IEC68-2-6

Weight：600g

Work Temperature:-25℃ ~ +75℃；Humidity：95% No condensing；

Storage：-45℃ ~ +85℃

Standard：CANOpen Standard

Electromagnetic：EN61000-4-2（8KV ESD）

EN61000-4-3，ENV50204（anti-electromagnetic 10V/m at 10KHz-1GHz）

EN61000-4-4（2KV Fast pulse group）

EN61000-4-5（Common mode 1KV，Differential mode 2KV SPD）

EN55022（Radiation class B）

DeviceNet Fiber Optic Converter(New Model)

The HFD-FO-DEV series DeviceNet fiber optic products.which used the most advanced technology in the world,can provide an optical point-to-point or bus network connection for DeviceNet data interfaces on one or two, multi mode or single mode optical fibers. The DeviceNet Point-to-Point Transmission units operate as the end or terminal points and provide an electrical connection and a two fibre optical connection. The units support CAN 1.0 and CAN 2.0 CAN standards, and CAN. And are transparent to all high level protocols.

This series DeviceNet Fiber Optic Converter is available in either wall mount, DIN rail or 3U chassis card configurations.

Product Features of the Devicenet fiber optic converter:

• Multi mode and single mode
• Single fiber solution supported
• New technology: Long distance transmission(20km) when baud rate is at high speed, No cascading.
• DIN Rail, Wall mount, rack or chassis configurations, Dual power supply

Other specs of the Devicenet fiber optic converter: