Sidebar
News Press
Administrator
CAN Remote I/O Module(16-ch Digital Input-DI)
CAN Remote I/O Module with16-ch Digital Input(16 DI)
CAN Bus Data Acquisition Module
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Feature and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- DI can read more than 600 times/second.
- Optocoupler isolation: Digital Input and Output.
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6011T |
CAN-6012T |
CAN-6013T |
||
|
Digital Input |
|||||
|
Input Channels |
16 |
|
8 |
||
|
Input Type |
Dry Contact |
Wet Contact |
|
Dry Contact |
Wet Contact |
|
On Voltage Level |
Close to GND |
0V～1V DC |
|
Close to GND |
0V～1V DC |
|
Off Voltage Level |
Open |
3V～50V DC |
|
Open |
3V～50V DC |
|
Overvoltage Protection |
+70V |
|
+70V |
||
|
Isolation |
3750Vrms |
|
3750Vrms |
||
|
Digital Output |
|||||
|
Output Channels |
|
16 |
8 |
||
|
Output Type |
|
Sink, Open Collector(NPN) |
Sink, Open Collector(NPN) |
||
|
Load Voltage |
|
Max 50V DC |
Max 50V DC |
||
|
Max Load Current |
|
500mA/channel |
500mA/channel |
||
|
Isolation |
|
3750Vrms |
3750Vrms |
||
Ordering Information:
1.2 Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN I/O Module(16 bit 8xSingle End Analogue Input(or 4xDifferential Analogue Input)+12bit 4xAnalogue Input+2xDigital Input+2xDigital Output)
CAN Remote I/O Module with 16 bit 8xSingle End AI(or 4xDifferential AI)+12bit 4 AI+2 DI+2 DO
CAN Data Acquisition Module(16 bit 8xSingle End AI(or 4xDifferential AI)+12bit 4xAI+2xDI+2xDO)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- DI can read more than 600 times/second.
- Optocoupler isolation: Digital Input and Output.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6088 |
|
|
|
Analog Input |
|||
|
Input Channels |
8-ch Single End or 4-ch Differential |
||
|
Input Type |
Single End or Differential |
||
|
Input Range |
±10V, ±5V, ±1.25V 0-20mA(External 250ohm Resistor Needed) 4-20 mA(External 250ohm Resistor Needed) |
||
|
Input Impedance |
> 10M(voltage), 250 ohm (current) |
||
|
Resolution |
16-bit |
||
|
Accuracy |
±0.01% |
||
|
Sampling Rate |
All channels: 8 samples/sec Per channel: 1samples/sec |
||
|
Isolation |
2500V |
||
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
||
|
Analog Output |
|||
|
Output Channels |
2 |
||
|
Output Range |
±10V, ±5V, 0V～5V, 0V～10V |
||
|
Resolution |
12-bit |
||
|
Accuracy |
±0.1% |
||
|
Isolation |
2500V |
||
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
||
|
Digital Input |
|||
|
Input Channels |
2 |
||
|
Input Type |
Dry Contact |
Wet Contact |
|
|
On Voltage Level |
Close to GND |
0V～1V DC |
|
|
Off Voltage Level |
Open |
3V～50V DC |
|
|
Overvoltage Protection |
+70V |
||
|
Isolation |
3750Vrms |
||
|
Digital Output |
|||
|
Output Channels |
2 |
||
|
Output Type |
Sink, Open Collector(NPN) |
||
|
Load Voltage |
Max 25V DC |
||
|
Max Load Current |
100mA/channel |
||
|
Isolation |
3750Vrms |
||
|
Input Channels |
8 |
||
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN Remote I/O Module(5-ch TC-Thermocouple)
CAN Bus Remote I/O Module with 5xTC
CAN Data Acquisition Module 5 channels of thermocouple
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6042T |
|
|
Thermocouple Input |
||
|
Input Channels: |
5 |
|
|
Input Type |
J |
-210℃~1200℃ |
|
|
K |
-200℃~1370℃ |
|
|
E |
-100℃~1000℃ |
|
|
T |
-200℃~400℃ |
|
|
N |
-200℃~1300℃ |
|
|
B |
650℃~1800℃ |
|
|
R |
0℃~1750℃ |
|
|
S |
0℃~1760℃ |
|
Input Impedance: |
1.5M |
|
|
ADC Resolution |
24-bit |
|
|
Temperature Resolution |
0.1℃ |
|
|
Accuracy: |
±0.1% or Better |
|
|
Sampling Rate: |
All channels: 5 samples/sec Per channel: 1samples/sec |
|
|
Isolation |
2500V |
|
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
|
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN Remote I/O Module(5-ch RTD)
CAN Bus I/O Module with 5xRTD
CAN Data Acquisition Module 5 channels of RTD
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6041T |
|
RTD Input |
|
|
Input Channels |
5 |
|
Input Connections |
2 or 3 wire |
|
Input Type |
PT100, PT200, PT500，PT1000（-200℃～+850℃） Cu50，Cu100（-50℃～+150℃） |
|
Input Impedance |
1.5M |
|
ADC Resolution |
24-bit |
|
Temperature Resolution |
0.1℃ |
|
Accuracy |
±0.1% |
|
Sampling Rate |
All channels: 5 samples/sec Per channel: 1samples/sec |
|
Isolation |
2500V |
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN I/O Module(16 bit 4-ch Analogue Output-AO)
CAN Bus I/O Module with 16 bit 4xAnalog Output(4 AO)
CAN Bus Data Acquisition Module(16 bit 4xAO)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6031T |
CAN-6032T |
|
|
Analog Output |
|||
|
Output Channels |
4 |
||
|
Output Range |
±10V, ±5V, 0V～5V, 0V～10V 0～20mA(Built-in 250ohm Resistor) 4～20mA(Built-in 250ohm Resistor) |
||
|
Resolution |
12-bit |
16-bit |
|
|
Accuracy |
±0.1% |
±0.01% |
|
|
Max Current Load Resistance |
Internal power +15 V: 500 Ω. External power +24 V: 1000 Ω. |
||
|
Isolation |
2500V |
||
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
||
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN I/O Module(12 bit 4-ch Analogue Output-AO)
CAN Bus Analog I/O Module with 12 bit 4xAnalog Output
CAN Data Acquisition Module(12 bit 4xAO)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6031T |
CAN-6032T |
|
|
Analog Output |
|||
|
Output Channels |
4 |
||
|
Output Range |
±10V, ±5V, 0V～5V, 0V～10V 0～20mA(Built-in 250ohm Resistor) 4～20mA(Built-in 250ohm Resistor) |
||
|
Resolution |
12-bit |
16-bit |
|
|
Accuracy |
±0.1% |
±0.01% |
|
|
Max Current Load Resistance |
Internal power +15 V: 500 Ω. External power +24 V: 1000 Ω. |
||
|
Isolation |
2500V |
||
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
||
Ordering Information:
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN I/O Module(16 bit 16-ch Single End Analogue Input+8xDifferential Analogue Input)
CAN Bus IO Module with 16 bit 6xSingle End AI+8xDifferential AI
CAN Data Acquisition Module(16 bit 16-ch Single End Analog Input+8xDifferential Analog Input)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6021T |
CAN-6022T |
|
|
Analog Input |
|||
|
Input Channels |
16-ch Single End or 8-ch Differential |
||
|
Input Type |
Single End or Differential |
||
|
Input Range |
±10V, ±5V, ±1.25V 0-20mA(External 250ohm Resistor Needed) 4-20 mA(External 250ohm Resistor Needed) |
||
|
Input Impedance |
> 10M(voltage), 250 ohm (current) |
||
|
Resolution |
12-bit |
16-bit |
|
|
Accuracy |
±0.1% |
±0.01% |
|
|
Sampling Rate |
All channels: 16 samples/sec Per channel: 1 samples/sec |
||
|
Isolation |
2500V |
||
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
||
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN I/O Module(12 bit 16-ch Single End Analogue Input+8-ch Differential Analogue Input)
CAN Bus I/O Module with 12 bit 16xSingle End AI+8xDifferential AI
CAN Data Acquisition Module(12 bit 16-ch Single End Analog InputI+8xDifferential Analog Input)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6021T |
CAN-6022T |
|
|
Analog Input |
|||
|
Input Channels |
16-ch Single End or 8-ch Differential |
||
|
Input Type |
Single End or Differential |
||
|
Input Range |
±10V, ±5V, ±1.25V 0-20mA(External 250ohm Resistor Needed) 4-20 mA(External 250ohm Resistor Needed) |
||
|
Input Impedance |
> 10M(voltage), 250 ohm (current) |
||
|
Resolution |
12-bit |
16-bit |
|
|
Accuracy |
±0.1% |
±0.01% |
|
|
Sampling Rate |
All channels: 16 samples/sec Per channel: 1 samples/sec |
||
|
Isolation |
2500V |
||
|
Protection |
Built-in TVS/ESD Protection ±4 kV Contact for each terminal |
||
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN I/O Module(5-ch Relay Output 3-ch Form A+2-ch Form C)
CAN Remote I/O Module with 5-ch Relay Output(3xForm A+2xForm C)
CAN Data Acquisition Module(5xRelay Output,3xForm A+2xForm C)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6014T |
CAN-6015T |
|
|
Relay Output |
|||
|
Output Channels |
5 |
5 |
|
|
Output Type |
Power Relay, Form A(SPST) |
Power Relay, 3-ch Form A(SPST), 2-ch Form C(SPDT) |
|
|
Output Voltage |
250VAC /30VDC |
||
|
Max Load Current |
3.0A/channel |
||
|
Operate Time |
6ms |
||
|
Release Time |
3ms |
||
|
Electrical Life |
At 30 VDC / 3 A Typical 1 x 105 operations (Operating frequency 20 operations/minute) At 250 VAC/ 3 A Typical 1 x 105operations (Operating frequency 20 operations/minute) |
||
|
Mechanical Life |
2x107 |
||
|
Isolation |
3750Vrms |
||
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |
CAN I/O Module(5-ch Relay Output Form A)
CAN Distributed Remote I/O Module with 5-ch Relay Output(Form A)
CAN Bus Data Acquisition Module(5xRelay Output)
Product Introduction (CAN-6000T Series)
CAN-6000T CAN-based data acquisition and control modules provide I/O, data acquisitions, and networking in one module to build a cost effective, distributed monitoring and control solution for a wide variety of applications. With CAN-based technology, CAN-6000T series modules build up a cost-effective DA&C system for building automation, environmental monitoring, and manufacturing applications.
Features and benefits:
- 32 bits & 120M high speed CPU, the real time embedded OS.
- Power or dual power(Analogue Modules): Independent isolation
- Surge protection: 15KV
- The analogue input: Magnetic coupling isolation and protection.
- The input voltage can be positive and negative, each channel has TVS and ESD protection.
- The measuring range can be shifted by software.
- The single end and differential can be shifted by software. Single end can be changed to 16 channels by software.
- The ID and baud rate can be adjusted by rotary button directly.
- Enclosure: shielded metal
- The differential sampling frequency can reach 50Hz/channel
- The CAN IO module can work with our CAN repeater, CAN switch, CAN PCI, CAN to Ethernet and CAN fiber optic extender to combine a complete CAN bus network system.
Hardware Specification:
|
System |
|||
|
CPU |
32-bit 120MIPS CPU |
||
|
Operation System |
Real-Time |
||
|
Watchdog |
Yes |
||
|
Communication |
RS-6000M |
CAN-6000T |
NET-6000M |
|
|
RS485 |
CAN |
Ethernet 10/100 Base-TX |
|
LED Display |
|||
|
Power Indicator |
Red |
||
|
Run Indicator |
Green |
||
|
Error Indicator |
Red |
||
|
Link Indicator |
Green |
||
|
Act Indicator |
Yellow |
||
|
Mechanical |
|||
|
Dimensions (W x H x D)(mm) |
140*110*40 |
||
|
Installation |
DIN-Rail mounting |
||
|
Environment |
|||
|
Operating Temperature |
-20℃～+70℃ |
||
|
Storage Temperature |
-30℃～+80℃ |
||
|
Power Requirements |
|||
|
Power Input |
+9V～30V DC |
||
|
Power Consumption |
<3W |
||
I/O Specification:
|
Model |
CAN-6014T |
CAN-6015T |
|
|
Relay Output |
|||
|
Output Channels |
5 |
5 |
|
|
Output Type |
Power Relay, Form A(SPST) |
Power Relay, 3-ch Form A(SPST), 2-ch Form C(SPDT) |
|
|
Output Voltage |
250VAC /30VDC |
||
|
Max Load Current |
3.0A/channel |
||
|
Operate Time |
6ms |
||
|
Release Time |
3ms |
||
|
Electrical Life |
At 30 VDC / 3 A Typical 1 x 105 operations (Operating frequency 20 operations/minute) At 250 VAC/ 3 A Typical 1 x 105operations (Operating frequency 20 operations/minute) |
||
|
Mechanical Life |
2x107 |
||
|
Isolation |
3750Vrms |
||
Ordering Information:
Odering Information (CAN-6000T CAN Bus Series)
|
Model |
Description |
|
Digital I/O |
|
|
CAN-6011T |
CAN Remote I/O Module with16-ch DI |
|
CAN-6012T |
CAN Remote I/O Module with16-ch DO |
|
CAN-6013T |
CAN Remote I/O Module with 8-ch DI and 8-ch DO |
|
Relay Output |
|
|
CAN-6014T |
CAN Remote I/O Module with 5-ch Relay(Form A) |
|
CAN-6015T |
CAN Remote I/O Module with 5-ch Relay(3-ch Form A, 2-ch Form C) |
|
Analog Input |
|
|
CAN-6021T |
CAN Remote I/O Module with 12bit 16-ch Single End AI or 8-ch differential AI |
|
CAN-6022T |
CAN Remote I/O Module with 16bit 16-ch Single End AI or 8-ch differential AI |
|
Analog Output |
|
|
CAN-6031T |
CAN Remote I/O Module with 12bit 4-ch AO |
|
CAN-6032T |
CAN Remote I/O Module with 16bit 4-ch AO |
|
RTD |
|
|
CAN-6041M |
CAN Remote I/O Module with 5-ch RTD |
|
Thermocouple |
|
|
CAN-6042M |
CAN Remote I/O Module with 5-ch TC |
|
Mixed |
|
|
CAN-6088 |
CAN Remote I/O Module with 16bit 8-ch Single End AI or 4-ch differential AI, 12bit 4-ch AO, 2-ch DI, 2-ch DO |