Self-healing Ring Ethernet Switches

Note: All our managed Ethernet switch models can support Ring Topology.

Redundant Ring with Plug And Play Performance
* Low Voltage redeundant AC/DC Power Inputs
* Broadcasting Storm Control
* Ruggedized Industrial Grade Housing
* Relay Output Warning for Failures

Specifications *

Technology
Network Standards:
IEEE802.3 10Base-T
IEEE802.3u 100BaseT(X) and 100BaseFX
IEEE802.3x Flow Control
Processing Type:Store and Forward
MAC Address:8K MAC Address Table
Broadcasting Storm Control:Automatic
Flow Control:Full/Half Duplex Back Pressure Flow Control
* Interface
RJ45 Port Connectors:10/100Base Auto-sensing, Full/Half Duplex MDI/MDI-X Auto-Negotiation
Fiber Port Connectors:100BaseFX, SC or ST connectors, Single-Mode or Multi-Mode
LED Indicators:Power, Port Status
* Power Requirements
Low Voltage Range:12~36VDC; 10~24VAC
High Voltage Range:200~350VDC; 165~265VAC
Connection:Standard 4 Pin Dual Power Connector
* Optical Fiber

* Physical Characteristics
Case:Slim Metal Case, IP40 Design
Dimensions:(W×H×D):49×139×115mm(HES8S)
DIN Rail or Panel Mounting
* Environment Limits
Standard Temp Models:-10˚C to 60˚C
Extended Temp Models:-40˚C to 75˚C
Storage Temperature:-40 to 85℃
Ambient Relative Humidity: 10 to 95%(Non-condensing)
* Agency Approvals
EMI:FCC Part15, CISPR(EN55022) Class A
EMS:
EN61000-4-2(ESD), Lv3
EN61000-4-3(RS), Lv3
EN61000-4-4(EFT), Lv3
EN61000-4-5(Surge), Lv3
EN61000-4-6(CS), Lv3
* Warranty
Warranty Period:5 years

Case Topology 1:

* Ordering Information

* All fiber cables can be equipped with ST connectors
* Typical Distance:Multi mode<15km; Single mode: Ranging from 15km to 120km
* The standard models are powered by 24VDC, 220VAC custom models are also available

Layer 3 Gigabit Ethernet Switches

* Layer 3 Switching, Supports Static Routing and RIP V1/V2
* Provide 4 Gigabit Combo Ports and 24 Fast-Ethernet Ports
* RingOn™ Redundant Ring Technology, Recovery Time
within 15ms, Supports RSTP/STP
* Enriched Management Features: QoS, IGMP snooping/
GMRP, VLAN, SNMP V1/V2/V3

Specifications

* Technology
Network Standards:
IEEE802.3 10Base-T
IEEE802.3u 100BaseT(X) and 100BaseFX
IEEE802.3ad 1000Base(X)
IEEE802.3z 1000BaseSX/LX/HLX/ZX
IEEE802.3x Flow Control
IEEE802.1p Classe of Service
IEEE802.1Q VLAN Tagging
IEEE802.1D for Spanning Tree Protocol
IEEE802.1W for Rapid STP
IEEE802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Flow Control:Full/Half Duplex Back Pressure Flow Control
Protocols:SNMP V1/V2/V3, DHCP Server, SNTP, SMTP, IGMP Snooping/GMRP, LACP, RMON,
HTTPS, Telnet, Syslog, HTTP
* Switch Properties
Priority Queues:4
IGMP Groups:64
Max. Available VLANs:256
VLAN ID Range:1~4096
* Interface
RJ45 Port Connectors:10/100Base(X) or 10/100/1000BaseT(X) Auto-Negotiation
Fiber Port Connectors:1000BaseSX/CX/LHX/ZX(SFP slots, LC connectors)
LED Indicators:Power, Port Status, 10/100/1000M
Console Port:DB9 male
Output Warning:Relay, Standard 2 Pin, 0.5A@24VDC
* Power Requirements
Power Inputs:48VDC(8~56VDC); 110/220VAC(85~265VDC);
220VDC(120~370VDC); 110VDC(100~120VDC);
* Optical Fiber

* Physical Characteristics
Case:Slim Metal Case, IP40 Design
Dimensions:(W×H×D):443×44×220mm(HFB7000 Series)
Installation:19" rack mounting
* Environment Limits
Standard Temp Models:-10˚C to 60˚C
Extended Temp Models:-40˚C to 85˚C
Storage Temperature:-40 to 85℃
Ambient Relative Humidity: 10 to 95%(Non-condensing)
* Agency Approvals
EMI:FCC Part15, CISPR(EN55022) Class A
EMS:
EN61000-4-2(ESD), Lv3
EN61000-4-3(RS), Lv3
EN61000-4-4(EFT), Lv3
EN61000-4-5(Surge), Lv3
EN61000-4-6(CS), Lv3
EN61000-4-9, Lv3
EN61000-4-8, 100A/m Continuous
EN61000-2-2
EN61000-4-11
* Warranty
Warranty Period:5 years

* Ordering Information

* All fiber cables can be equipped with ST connectors
* Typical Distance:Multi mode<15km; Single mode: Ranging from 15km to 120km
* Default Power Inputs:220V

Full layer 3 Gigabit Ethernet switches

* Layer-3 Switching, Supports Static Routing and RIP V1/V2
* Up to 28 Gigabit Ports And 4 Fiber Ports with SFP Slot
* RingOn™ Redundant Ring Technology, Recovery Time
within 15ms, Supports RSTP/STP
* Enriched Management Features: QoS, IGMP snooping/
GMRP, VLAN, SNMP V1/V2/V3

Specifications

* Technology
Network Standards:
IEEE802.3 10Base-T
IEEE802.3u 100BaseT(X) and 100BaseFX
IEEE802.3ad 1000Base(X)
IEEE802.3z 1000BaseSX/LX/HLX/ZX
IEEE802.3x Flow Control
IEEE802.1p Classe of Service
IEEE802.1Q VLAN Tagging
IEEE802.1D for Spanning Tree Protocol
IEEE802.1W for Rapid STP
IEEE802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Flow Control:Full/Half Duplex Back Pressure Flow Control
Protocols:SNMP V1/V2/V3, DHCP Server, SNTP, SMTP, IGMP Snooping/GMRP, LACP, RMON,
HTTPS, Telnet, Syslog, HTTP
* Switch Properties
Priority Queues:4
IGMP Groups:64
Max. Available VLANs:256
VLAN ID Range:1~4096
* Interface
RJ45 Port Connectors:10/100Base(X) or 10/100/1000BaseT(X) Auto-Negotiation
Fiber Port Connectors:1000BaseSX/CX/LHX/ZX(SFP slots, LC connectors)
LED Indicators:Power, Port Status, 10/100/1000M
Console Port:DB9 male
Output Warning:Relay, Standard 2 Pin, 0.5A@24VDC
* Power Requirements
Power Inputs:48VDC(8~56VDC); 110/220VAC(85~265VDC);
220VDC(120~370VDC); 110VDC(100~120VDC);
* Optical Fiber

* Physical Characteristics
Case:Slim Metal Case, IP40 Design
Dimensions:(W×H×D):443×44×220mm(MX8000 Series)
Installation:19" rack mounting
* Environment Limits
Standard Temp Models:-10˚C to 60˚C
Extended Temp Models:-40˚C to 85˚C
Storage Temperature:-40 to 85℃
Ambient Relative Humidity: 10 to 95%(Non-condensing)
* Agency Approvals
EMI:FCC Part15, CISPR(EN55022) Class A
EMC:
EN61000-4-2(ESD), Lv3
EN61000-4-3(RS), Lv3
EN61000-4-4(EFT), Lv3
EN61000-4-5(Surge), Lv3
EN61000-4-6(CS), Lv3
EN61000-4-9, Lv3
EN61000-4-8, 100A/m Continuous
EN61000-2-2
EN61000-4-11
* Warranty
Warranty Period:5 years

* Ordering Information

* All fiber cables can be equipped with ST connectors
* Typical Distance:Multi mode<15km; Single mode: Ranging from 15km to 120km
* Default Power Inputs:220V

Din Rail Managed Gigabit Ethernet Switch

* Up to 4 Gigabit Combo Ports
* RingOn™ Redundant Ring Technology, Recovery Time
within 15ms, Supports RSTP/STP
* Enriched Management Features: QoS, IGMP snooping/
GMRP, VLAN, SNMP V1/V2/V3
* Multiple Redundant AC/DC Power Choices

Specifications

* Technology
Network Standards:
IEEE802.3 10Base-T
IEEE802.3u 100BaseT(X) and 100BaseFX
IEEE802.3ad 1000Base(X)
IEEE802.3z 1000BaseSX/LX/HLX/ZX
IEEE802.3x Flow Control
IEEE802.1p Classe of Service
IEEE802.1Q VLAN Tagging
IEEE802.1ad LACP
IEEE802.1D for Spanning Tree Protocol
IEEE802.1W for Rapid STP
IEEE802.3X for Authentication
Broadcasting Storm Control:Automatic
Processing Type:Store and Forward
Management:by Web Browser
RingOn™:Recovery Time within 15ms
Flow Control:Full/Half Duplex Back Pressure Flow Control
Protocols:SNMP V1/V2/V3, DHCP Server, SNTP, SMTP, IGMP Snooping/GMRP, LACP, RMON,
HTTPS, Telnet, Syslog, HTTP
* Switch Properties
Priority Queues:4
IGMP Groups:64
Max. Available VLANs:256
VLAN ID Range:1~4096
* Interface
RJ45 Port Connectors:10/100Base(X) or 10/100/1000BaseT(X) Auto-Negotiation
Fiber Port Connectors:1000BaseSX/CX/LHX/ZX(SFP slots, LC connectors)
LED Indicators:Power, Port Status, 10/100/1000M
Console Port:DB9 male
Output Warning:Relay, Standard 2 Pin, 0.5A@24VDC
* Power Requirements
Low Voltage Range:12~36VDC; 10~24VAC
High Voltage Range:200~350VDC; 165~265VAC
Connection:Standard 4 Pin Dual Power Connector
* Optical Fiber

* Physical Characteristics
Case:Slim Metal Case, IP40 Design
Dimensions:(W×H×D):
HFB10M-2G:89×144×125mm
HFB18M-2G:70×149×130mm
HFB28M-4G:91×166×130mm
DIN Rail or Panel Mounting
* Environment Limits
Standard Temp Models:-10 to 60˚C
Extended Temp Models:-40 to 75˚C
Storage Temperature:-40 to 85˚C
Ambient Relative Humidity: 10 to 95%(Non-condensing)
* Agency Approvals
EMI:FCC Part15, CISPR(EN55022) Class A
EMC:
EN61000-4-2(ESD), Lv3
EN61000-4-3(RS), Lv3
EN61000-4-4(EFT), Lv3
EN61000-4-5(Surge), Lv3
EN61000-4-6(CS), Lv3
* Warranty
Warranty Period:5 years

* Ordering Information

* All fiber cables can be equipped with ST connectors
* Typical Distance:Multi mode<15km; Single mode: Ranging from 15km to 120km
* The standard models are powered by 24VDC, 220VAC custom models are also available

DIN-rail Gigabit Unmanaged Industrial Ethernet Switches

* Up to 4 Gigabit Combo Ports
* Elastic configuration, 100Base fiber port with SC/ST
connectors, multi-mode/single-mode models are available
* Multiple power inputs include low voltage redundant
power models and 220VAC models
* Broadcasting Storm Controller

Specifications

* Technology
Network Standards:
IEEE802.3 10Base-T
IEEE802.3u 100BaseT(X) and 100BaseFX
IEEE802.3ad 1000Base(X)
IEEE802.3z 1000BaseSX/LX/HLX/ZX
IEEE802.3x Flow Control
Broadcasting Storm Control:Automatic
Flow Control:Full/Half Duplex Back Pressure Flow Control
* Interface
RJ45 Port Connectors:10/100Base(X) or 10/100/1000BaseT(X) Auto-Negotiation
Fiber Port Connectors:1000BaseSX/CX/LHX/ZX(SFP slots, LC connectors)
LED Indicators:Power, Port Status, 10/100/1000M
* Power Requirements
Low Voltage Range:12~36VDC; 10~24VAC
High Voltage Range:200~350VDC; 165~265VAC
Connection:Standard 4 Pin Dual Power Connector
* Optical Fiber

* Physical Characteristics
Case:Slim Metal Case, IP40 Design
Dimensions:(W×H×D):
HFB10-2G:89×144×125mm
HFB18-2G:70×149×130mm
HFB28-4G:91×166×130mm
DIN Rail or Panel Mounting
* Environment Limits
Standard Temp Models:-10℃ to 60℃
Extended Temp Models:-40℃ to 75℃
Storage Temperature:-40 to 85℃
Ambient Relative Humidity: 10 to 95%(Non-condensing)
* Agency Approvals
EMI:FCC Part15, CISPR(EN55022) Class A
EMC:
EN61000-4-2(ESD), Lv3
EN61000-4-3(RS), Lv3
EN61000-4-4(EFT), Lv3
EN61000-4-5(Surge), Lv3
EN61000-4-6(CS), Lv3
* Warranty
Warranty Period:5 years

* Ordering Information

* All fiber cables can be equipped with ST connectors
* Typical Distance:Multi mode<15km; Single mode: Ranging from 15km to 120km
* The standard models are powered by 24VDC, 220VAC custom models are also available

DIN-rail Managed Industrial Ethernet Switch(10/100M)

* RingOn™ Redundant Ring Technology, Recovery Time
within 15ms, Supports RSTP/STP
* Enriched Management Features: QoS, IGMP snooping/
GMRP,VLAN, SNMP V1/V2/V3
* Multiple Redundant AC/DC Power Choices
* Upgrated EMI Immunity

Specifications:

* Technology
Network Standards:
IEEE802.3 10Base-T
IEEE802.3u 100BaseT(X), 100BaseFX
IEEE802.3x Flow Control
IEEE802.1p Classe of Service
IEEE802.1Q VLAN Tagging
IEEE802.1ad LACP
Processing Type:Store and Forward
MAC Address:8k MAC Address Table
Management:by Web Browser
RingOn™:Recovery Time within 15ms
Broadcasting Storm Control:Automatic
Flow Control:Full/Half Duplex Back Pressure Flow Control
Protocols support by our Ethernet Switch:SNMP V1/V2/V3, DHCP Server, NTP/SNTP, SMTP, IGMP Snooping/GMRP, LACP, RMON,
HTTPS, Telnet, Syslog, HTTP,Profinet,Modbus TCP,IEC-61850,BacNet,DNP3,IEC102/103/104,OPC & Other Protocols.
* Switch Properties
Priority Queues:4
IGMP Groups:64
Max. Available VLANs:256
VLAN ID Range:1~4096
* Interface
RJ45 Port Connectors:10/100Base Auto-sensing, Full/Half Duplex MDI/MDI-X Auto-Negotiation
Fiber Port Connectors:100BaseFX, SC or ST connectors, Single-Mode or Multi-Mode
LED Indicators:Power, Port Status
Console Port:DB9 male
Output Warning:Relay, Standard 2 Pin, 0.5A@24VDC
* Power Requirements
Low Voltage Range:12~36VDC; 10~24VAC
High Voltage Range:200~350VDC; 165~265VAC
Connection:Standard 4 Pin Dual Power Connector
* Optical Fiber

* Physical Characteristics
Case:Slim Metal Case, IP40 Design
Dimensions:(W×H×D):
HFB8M:49×139×115mm
HFB16M:70×149×130mm
HFB24M:91×149×130mm
DIN Rail or Panel Mounting
* Environment Limits
Standard Temp Models:-10˚C to 60˚C
Extended Temp Models:-40˚C to 75˚C
Storage Temperature:-40 to 85˚C
Ambient Relative Humidity: 10 to 95%(Non-condensing)
* Agency Approvals
EMI:FCC Part15, CISPR(EN55022) Class A
EMC:
EN61000-4-2(ESD), Lv3
EN61000-4-3(RS), Lv3
EN61000-4-4(EFT), Lv3
EN61000-4-5(Surge), Lv3
EN61000-4-6(CS), Lv3

Apllication Case Figure 1:

* Warranty
Warranty Period:5 years

* Ordering Information

* All fiber cables can be equipped with ST connectors
* Typical Distance:Multi mode<15km; Single mode: Ranging from 15km to 120km
* The standard models are powered by 24VDC, 220VAC custom models are also available

DIN-rail 10/100M Unmanaged Industrial Ethernet Switches

10/100BaseT(X), 100BaseFX(SC/ST Connectors)

Low Voltage redeundant AC/DC Power Inputs

Metal Case with IP40 Protection

Broadcasting Storm Control

Operating Temperature:-40℃~75℃

Specifications

Technology

• Network Standards:
• IEEE802.3 10Base-T
• IEEE802.3u 100BaseT(X) and 100BaseFX
• IEEE802.3x Flow Control
• Processing Type:Store and Forward
• MAC Address:8K MAC Address Table
• Broadcasting Storm Control:Automatic
• Flow Control:Full/Half Duplex Back Pressure Flow Control

Interface

• RJ45 Port Connectors:10/100Base Auto-sensing, Full/Half Duplex MDI/MDI-X Auto-Negotiation
• Fiber Port Connectors:100BaseFX, SC or ST connectors, Single-Mode or Multi-Mode
• LED Indicators:Power, Port Status

Power Requirements

• Low Voltage Range:12~36VDC; 10~24VAC
• High Voltage Range:200~350VDC; 165~265VAC
• Connection:Standard 4 Pin Dual Power Connector

Optical Fiber

Physical Characteristics

• Case:Slim Metal Case, IP40 Design
• Dimensions:(W×H×D):
• HFB5:30×127×80mm
• HFB8:44×130×95mm
• HFB16:70×149×130mm
• HFB24:91×149×130mm
• DIN Rail or Panel Mounting

Environment Limits

• Standard Temp Models:-10˚C to 60˚C
• Extended Temp Models:-40˚C to 75˚C
• Storage Temperature:-40 to 85℃
• Ambient Relative Humidity: 10 to 95%(Non-condensing)

Agency Approvals

• EMI:FCC Part15, CISPR(EN55022) Class A
• EMC:
  EN61000-4-2(ESD), Lv3
  EN61000-4-3(RS), Lv3
  EN61000-4-4(EFT), Lv3
  EN61000-4-5(Surge), Lv3
  EN61000-4-6(CS), Lv3

Warranty

Warranty Period:5 years

Ordering Information

• All fiber cables can be equipped with ST connectors
• Typical Distance:Multi mode<15km; Single mode: Ranging from 15km to 120km
• The standard models are powered by 24VDC, 220VAC custom models are also available

32 Channel Fiber Optic Video Transceiver

Overview

Digital fiber optic video transmitter can simultaneously transmit 1-128 channels of 8-bit or 10-bit digitally encoded video/return or bidirectional data/unidirectional or bidirectional audio / Ethernet / Telephone / binary input/output over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

Features

l 8-bit or 10-bit digitally encoded and non-compression video transmission

l Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols

l Power supply and other parameter state indication, which can monitor the

operation condition of system

l Support no-damage regenerative trunk of video

l Constant input optical power, and large dynamic range , no electrical or optical adjustments required .

l Special ASIC design .

l Industry-grade of operating temperature from -10c to 75c , which is

applied to the different working environment

l Hot-swap function

l Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

l Optical interface: FC,ST, SC (optional)

l Abundant signal interface, such as video, data, audio, telephone, Ethernet,
binary input/output and talkback

l Max range 80km

Application

l City traffic monitoring system

l Police and safe city monitoring system

l High way security protection and toll station system

l Building and campus monitoring system

l Industrial monitoring(airport, chemical plant, steel, oil, railway,  irrigation works, mine and so on)

l Military monitoring(storage, frontier defense, guard, national defense and so on)

l Electronic power oil field, TV station program broadcasting system

l Gymnasium(live video and audio transmission)

Specifications

Opitcal

Video

Audio 

Data 

Ethernet 

Telephone 

Binary input/Output 

Operating Voltage: DC 5V (we will offer external power supply from AC100-240V to DC 5V for each unit )

Operating Temperature : -10℃~ +75℃

Storing Temperature : -40℃~ +85℃

Humidity : 0~95% Non-condensing

MTBF : ≥ 100000Hours

Model Selection:

16 Channel Fiber Optic Video Transceiver

Overview

Digital fiber optic video transmitter can simultaneously transmit 1-128 channels of 8-bit or 10-bit digitally encoded video/return or bidirectional data/unidirectional or bidirectional audio / Ethernet / Telephone / binary input/output over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

Features

l 8-bit or 10-bit digitally encoded and non-compression video transmission

l Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols

l Power supply and other parameter state indication, which can monitor the

operation condition of system

l Support no-damage regenerative trunk of video

l Constant input optical power, and large dynamic range , no electrical or optical adjustments required .

l Special ASIC design .

l Industry-grade of operating temperature from -10c to 75c , which is

applied to the different working environment

l Hot-swap function

l Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

l Optical interface: FC,ST, SC (optional)

l Abundant signal interface, such as video, data, audio, telephone, Ethernet,
binary input/output and talkback

l Max range 80km

Application

l City traffic monitoring system

l Police and safe city monitoring system

l High way security protection and toll station system

l Building and campus monitoring system

l Industrial monitoring(airport, chemical plant, steel, oil, railway,  irrigation works, mine and so on)

l Military monitoring(storage, frontier defense, guard, national defense and so on)

l Electronic power oil field, TV station program broadcasting system

l Gymnasium(live video and audio transmission)

Specifications

Opitcal

Video

Audio

Data

Ethernet 

Telephone 

Binary input/Output 

Operating Voltage: DC 5V (we will offer external power supply from AC100-240V to DC 5V for each unit )

Operating Temperature : -10℃~ +75℃

Storing Temperature : -40℃~ +85℃

Humidity : 0~95% Non-condensing

MTBF : ≥ 100000Hours

Model Selection:

12 Channel Fiber Optic Video Transceiver

Overview

Digital fiber optic video transmitter can simultaneously transmit 1-128 channels of 8-bit or 10-bit digitally encoded video/return or bidirectional data/unidirectional or bidirectional audio / Ethernet / Telephone / binary input/output over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation ,which is suitable for different working environment .

Features

l 8-bit or 10-bit digitally encoded and non-compression video transmission

l Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols

l Power supply and other parameter state indication, which can monitor the

operation condition of system

l Support no-damage regenerative trunk of video

l Constant input optical power, and large dynamic range , no electrical or optical adjustments required .

l Special ASIC design .

l Industry-grade of operating temperature from -10c to 75c , which is

applied to the different working environment

l Hot-swap function

l Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.

l Optical interface: FC,ST, SC (optional)

l Abundant signal interface, such as video, data, audio, telephone, Ethernet,
binary input/output and talkback

l Max range 80km

Application

l City traffic monitoring system

l Police and safe city monitoring system

l High way security protection and toll station system

l Building and campus monitoring system

l Industrial monitoring(airport, chemical plant, steel, oil, railway,  irrigation works, mine and so on)

l Military monitoring(storage, frontier defense, guard, national defense and so on)

l Electronic power oil field, TV station program broadcasting system

l Gymnasium(live video and audio transmission)

Model Selection: